亚洲国产精品久久久天堂_猫咪免费人成网站在线观看_亚洲色成人网站www永久_在线观看av永久免费_久久无码人妻丰满熟妇区毛片

Hotline::

18675275155

Information

聯系方式

公 司: Huizhou Jiangtai Technology Co. , Ltd.
地 址: Building A, Guangyuan Feng hardware city, 49 jinshi fifth road, Xiaojinkou, Huicheng District, Huizhou
電 話: 18675275155
E-mail: jt@hzjiangtai.com

How much do you know about the technical implementation elements of electronic component cutting machines?

TIME:2024-01-12View:2204

After the purchase of electronic components, a certain degree of trimming is required according to the needs. For electronic components with pins arranged in a row of left and right intervals, scissors can be used to trim all pins on a row at once. However, for electronic components with two rows and multiple rows of pins, scissors cannot complete the trimming at once and require multiple uses of scissors, resulting in lower efficiency.

 

Technical implementation elements:

 

The purpose of this utility model is to provide an electronic component trimming machine that can use scissors on electronic components to improve production efficiency.

 

To achieve the above objectives, the present utility model adopts the following technical scheme: an electronic component foot cutting machine, comprising a support plate, wherein the support plate is equipped with a conveyor belt component, left and right opposite left and right knife heads, the conveyor belt component comprises a roller drum arranged in parallel before and after, and an annular belt body sleeved on two rollers. A middle plate is provided between the left knife head and the right knife head, and the annular belt body is sleeved outside the middle plate, The left and right cutting heads are both matched with a first driving mechanism. Under the action of the first driving mechanism, the left cutting head moves towards the left side of the middle plate and the right cutting head moves towards the right side of the middle plate.

 

When using the foot cutting machine of this utility model, electronic components are placed on the upper end face of the annular belt body of the conveyor belt component, so that the shell of the electronic components is supported on the annular belt body, and the pins on the left and right sides of the electronic components are respectively located on the left and right sides of the annular belt body. Then, the annular belt body is moved to drive the electronic components between the left and right cutting heads. At this time, the pins on the left side of the electronic components are located between the middle plate and the left cutting head The pin on the right side of the electronic component is located between the middle plate and the right cutting head. The first driving mechanism is activated to complete the trimming operation, and then the annular belt body continues to move the electronic component that has completed the trimming to the cutting end. This utility model can complete the trimming of electronic components in one go, greatly improving production efficiency and reducing labor intensity for workers.

 

As a preferred option, the conveyor belt component is fixed on the upper side of the lifting plate, which is equipped with a second driving mechanism. Under the action of the second driving mechanism, the conveyor belt component moves up and down relative to the middle plate. Among them, according to the needs of different electronic component pin lengths, different heights of lifting plates are selected to enable the utility model to adjust the length of the cutting feet.

As a preferred choice, a vertical plate is provided on the support plate, and a horizontal plate is inherently arranged along the left and right directions on the vertical plate. The upper end face of the horizontal plate is concave to have a fixed groove that runs through the front and back. The middle plate is fixed in the fixed groove, and the horizontal plate is located on the front or rear side of the left and right cutting heads. The above settings are used to improve the support effect of the middle plate and prevent it from shaking left and right, ensuring the effect of foot cutting.

 

As a preferred option, one end of the middle plate extends to the feeding end of the conveyor belt component, and one end of the middle plate located at the feeding end forms a gradually increasing width structure from the feeding end to the discharging end. The middle board can also be used for guiding the movement of electronic components.

 

As a preferred option, a detection sensor is installed on the side of the conveyor belt component, and the detection sensor is located on the front side of the left and right cutting heads. When the detection sensor detects electronic components on the annular belt body, the first driving mechanism starts after AS. Set the time relay delay as, and the detection sensor can be selected as an infrared receiving sensor, or other position detection sensors can be used.

 

As a preferred embodiment, the second driving mechanism comprises a driving motor and a screw rod, wherein the screw rod rotates to move the lifting plate upwards or downwards, and a threaded block is fixed on the lifting plate, which is matched with the screw thread. The lifting plate is provided with several guide blocks, and the support plate is provided with several guide columns. The lifting plate and guide blocks are provided with guide holes that are matched with the guide columns. Use a screw to lift the lifting plate up and down, with higher accuracy to achieve better foot cutting effect.

 

As a preferred option, a cover is provided on the support plate, which at least includes a pressure plate located on the upper side of the annular belt body, and there is a space for the electronic component housing to pass through between the pressure plate and the upper end face of the annular belt body. The pressure plate is used to prevent electronic components from bouncing up when they move.

 

As a preferred option, the supporting plate is equipped with a through groove that runs through the upper and lower parts relative to the left and right cutting heads, and a waste collection box is provided on the lower side of the through groove. The waste collection box is used to collect cut pins.


筆記

Home
Phone
Feedback
主站蜘蛛池模板: 亚洲a∨无码一区二区三区| 4444亚洲人成无码网在线观看| 久久五月精品中文字幕| 性猛交╳xxx乱大交| 亚洲熟女精品中文字幕| 欧美拍拍视频免费大全| 久久精品www人人爽人人| 国产拍拍拍无码视频免费| 麻豆天美国产一区在线播放| 亚洲av无码成人网站在线观看 | 亚洲欧美国产精品久久久久久久| 强行糟蹋人妻hd中文字幕| 色欲色av免费观看| 无码性午夜视频在线观看| 国产精品对白交换视频| 黄页网站视频| 极品粉嫩嫩模大尺度无码| 久久国产免费观看精品3| 国产精品一区二区久久精品| 欲色欲色天天天www| 亚洲人成无码www久久久| 国产激情电影综合在线看| 免费无码国产v片在线观看| www成人国产高清内射| 精品人妻少妇一区二区| 国产高颜值大学生情侣酒店| 久久亚洲av成人无码电影| 精品久久久久成人码免费动漫| 无遮挡啪啪摇乳动态图| 国产在线精品一区二区不卡| 亚洲最大成人综合网720p| 亚洲国产欧美在线观看| 寡妇被老头舔到高潮的视频| 亚洲综合伊人久久综合| 一边吃奶一边摸做爽视频| 公粗挺进了我的密道在线播放贝壳| 亚洲啪啪av无码片| 未满小14洗澡无码视频网站| 国产av无码专区亚洲avjulia| 大香伊蕉在人线免费视频| 欧洲精品久久久av无码电影|